Excelight UV System with high quality and budget-friendly sterilization system and user-friendly design for installation and operation lines are here to purify your water supply in a modern way. Excelight Complete UV Disinfection 6GPM+ systems include polished 304SS reactor, mounting clips, CSA approved ballast c/w audible and visual alarm, lamp end-of-life indicator 7-day override. Available in 1, 6, 8 and 12 GPM with various I/O ratings.
Product Details & Description
Description
Product Spec
Order
Excelight 720A UV systems are the family of point-of-entry (POE) ultraviolet disinfection systems. The best function is when the water becomes free of visible contaminants and colour. They are made from the best quality components. We have services that provide the correct installation and maintenance, ensuring optimal system safety, performance and life. Your UV disinfection system must be the last component in your water treatment system, downstream from all other equipment. Choose a location for installation with easy access to a 120VAC electrical outlet. The direction of water flow in the supply line is a noticeable concern. Features like Crystal quartz sleeve with silicone O-rings and UV lamps with four-pin connectors are included.
From here, you can see the requirement of your shipment. Place your order, then complete the exact address of your location and your personal information, where you would receive your shipment. We deliver the shipment to your hands as soon as possible. If you wish to return the product for any reason uncomfortable, explain the situation in the shipment returning section.
Disinfection Procedure
UV disinfection systems are preferred to install on the PE tube, connecting the RO water storage tank or the carbon filter system to the sink faucet. While the UV disinfection process happening, the only place disinfection takes place is within the reactor chamber. Since there is no extra disinfectant holding capacity, it is necessary to chemically disinfect the plumbing system before the UV system's initialization.
Inactivating unwanted contaminants and bacteria
Inactivate Harmful Contaminants
Inactivate chlorine-resistant parasites, harmful bacteria and viruses that are invisible with the naked eye. However, some parameter measurements should be considered for the UV system to reach its maximum efficiency. These parameters are include Hardness, Iron, Manganese, Turbidity and suspended solids which should be lower than s specific ppm.
Trouble-free installation
Every unit is equipped with all necessary hardware, which benefits from easy wall-mount installation clips. The installation manual accessible to the users provides step by step guide through the process of installation.
UV Sensors
Exact sensors implanted in UV disinfection systems help understanding the system's general condition, including both visual and audible alarm announcements, to indicate lamp operation/failure and an integral annual lamp change reminder timer.
